Explore Our Store
CM&C Concrete Machinery & Controls
CM&C Concrete Machinery & Controls IS ON YOUR SIDE!
ONLINE STORE
- All
- Hydronix
- Wenglor
- Monitouch HMI
- Fuji Frenic Drives
- Turck
- Banner
Hydro-Probe
Optimised for non-organic materials: Sand, Aggregates, RAP…
A cable, part 0975A or 0975AT is required for the above sensor.
Please note legacy Compatibility Mode is not available on this sensor.
$4,475.00
U1RT002
These ultrasonic sensors evaluate the sound reflected from the object. They can detect almost any object and are especially well suited for monitoring fill levels of liquids and bulk goods and for detecting transparent objects, regardless of material, state of matter, color or degree of transparency. The measured value can be read out via IO-Link, and the sensor can be adapted as needed to the application. Its construction saves space when installed on conveyor lines. The sensor can be used in reflex mode operation and as an ultrasonic through-beam sensor. Technical Data
$338.00
ODX202P0107
wenglor fiber-optic cables are connected to these sensors. The easy to use teach-in function allows for fine sensor adjustment, so that even transparent objects can be reliably recognized in through-beam mode operation. The scanning width is automatically adapted to each individual application via external teach-in. The sensors can be easily mounted to standard DIN rails. Technical Data
$184.00
B50S101
The vision sensor weQubeVision is based on the wenglor MultiCore technology. The functions autofocus, region of interest and tracking ensure optimal object detection. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, filter options, and statistics evaluation. Technical Data
$2,877.00
HO08PA3
These sensors detect distance by measuring angles. They are particularly good at recognizing objects in front of any background. The color, shape and surface characteristics of the object have practically no influence on sensor switching performance. Also these sensors don’t influence each other if their light spots are pointed onto the same spot or against each other. Technical Data
$165.00
K1R87PCT2
A reflector must be used in combination with these sensors. wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation, and can be easily protected as well. Time delay can be activated by RS-232 interface . Technical Data
$230.00
OCP662X0135
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface. Technical Data
$723.00
P2PY108
The sensors function in accordance with the principle of transit time measurement with laser class 1. wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny objects even at extreme angles. wintec also works very reliably in adverse ambient conditions, such as those caused by ambient light or contamination. The robust 316L stainless steel housing (1.4404/V4A ) is resistant to oils, coolants, and cleaning agents. Technical Data
$1,110.00
